10G OM3 Fiber Patch Cable - Fiber network solution

Fiber optic patch cables are widely used for high speed communication needs and they can be found in routers, fiber patch panels, media converters and even in hubs and switches. fiber patch cords are preferred over normal copper cables because use of fiber optic patch cables result in comparatively lower loss of signal and because they are highly reliable. The military prefers fiber optic patch cables because these cables are hundred percent immune to any electromagnetic interference.

Big quantity information is generated every day on the internet and people need to exchange more and more information which in turn result in the demand of more and more bandwidth. IEEE802.3ae defined the 10Gigabit Ethernet standards used in LANs. OM3 10G multimode fiber optic cables are developed for such 10Gig Ethernet applications, they are with so called OM3 optical fiber, which is 50/125 type and with industrial acknowledged Aqua color. OM3 10G fiber enable low cost 10g fiber optic communications over multimode fiber for as long as 500 meters or so.

With the development of multimedia ,there is requirement for more and more broad bandwidth for audio and video applications. Nowadays many people need the multimode fiber optic cable that can transmit 10G signal. Fiberstore 10 Gig fiber optic patch cord are designed to meet this requirement,these 10g fiber optic patch cords are with aqua OM3 50/125 fiber glass and they are typically used in 10 Gigabit Ethernet,our 10 gigabit fiber optic patch cord the bandwidth supported is as specified IEEE802.3z which is for gigbit ethernet.10 gig fiber optic patch cords are manufactured according to TIA-492AAAC-A standard for OM3 cable ,and the typical cable color is as per aqua standard which was developed by Lucent technologies.

Fiberstore LC/LC 10 GIG OM3 MM 50/125 Duplex Fiber Patch Cable – 2 Meter

2 meter LC to LC duplex 10 GIG laser optimized 50/125 micron fiber optic patch cable. The LC/LC LOMMF patch cord is the ideal choice for 10 gigabit networks and all other interconnect applications where bandwidth intensive data rates up to a 10 gigabit are required. Constructed with LC connectors on both ends and aqua multimode duplex zipcord cable with Corning™ InfinCor® SX+ OM3 glass. Corning’s InfiniCor® SX+ 10GbE OM3 50/125 glass enables optimized data rates of 10 gigabit up to 300 meters in the 850nm wavelength. 10 Gig Fiber are designed to be used in conjunction with VCSEL (Vertical Cavity Surface Emitting Laser) laser light sources. When the LOMMF is employed with a VCSEL light source you can obtain a 2000MHz EMB (Effective Modal Bandwidth) in the 850NM window, this is more than 3 times the bandwidth of traditional multimode fiber. LC Connectors (Lucent™ connector) standardized as FOCIS-10 are a small form factor connector ideal for high density applications in data centers, telecommunication closets, CATV systems, central office and other applications that require a small footprint, high performance connection. The LC to LC fiber jumper employs duplex clips on both ends to insure proper polarity during installation.

Features:

☆. Simplex or duplex or multi fiber assemblies
☆. Riser or Plenum rated,, LSZH and RoHS cables available
☆. Low insertion loss, IEC, TIA/EIA, Telcordia compliant
☆. good performance on return loss
☆. Custom fiber optic cable lengths and jacket colors
☆. Various fiber types and wavelengths, typical 9/125 single mode, 50/125 multimode and 62.5/125 multimode
☆. 0.9 / 1.8 / 2.0 / 3.0 / mm outer diameter fiber optic cables
☆. PC, UPC, and APC polish types
☆. Good packing, competitive prices and very fast delivery

Applications:
☆. Gigabit Ethernet
☆. Video, multimedia
☆. Premise installations
☆. Test and measurement
☆. Industrial, Military

buy multimode fiber optic patch cord, This fiber optic jumper has been manufactured utilizing state of the art equipment and procedures and has undergone an extensive testing and quality control inspection after the final assembly and polishing. Visual inspection is done under a 400X microscope examining for any defects or flaws on the glass core or ferrule. Performance testing is performed to verify insertion and return loss to insure the cord meets and conforms to all applicable industry standards. Each fiber optic patch cord is individually packaged with its own unique test results. All Connectivity Supply’s fiber optic patch cords are RoHS compliant.

Fiberstore has 15 years experience inmanufacturing fiber optic cable assemblies. If you have a fiber network, no matter what the technology, Fiberstore can offer you a solution to your problem. Optical Fiber patch cords are a defining factor in ensuring your network performs to the highest level, with a FibreFab patch cord you can be confident you are using the very best in cable, connectors and manufacturing.